Elkatherm SN-201
The SN-Series, with its low depth of only 8 cm and a height of 38 cm, can be installed very easily, e.g., under the window sill. The SN-Series is available with outputs ranging from 500-2500 Watts.
description:
- Power / Watt: 2.000
- fuse / Ampere: 10
- H/W/D: 38/162,5/8 cm
- for up to m³: 60
- weight KG: 45
- Standard colour white RAL9010, available in all RAL-Colours (delivery 10 days later)
- including materials for wall fixing
- with integrated manual or digital thermostat and with App control
This advanced feature maintains a constant temperature, and also maximizes the all important convection current within the room, so you consistently re - use warmth which has previously risen to ceiling height - giving you greater energy efficiency.
Power is drawn in small and regular amounts to top up the reserve as the thermostat accurately maintains the set temperature.
Elkatherm 'smooth warmth' models will give you an even and more natural warmth. Highly controllable electric central heating - precisely when you require it.
Advanced Energy Efficient ''Continental Style'' Design
Elkatherm ''smooth warmth'' elements are completely enclosed in ''partial heat storage'' fireclay material wafers within the centre body section of each unit.
Enclosed elements mean no scorched, unpleasant or overdried air is produced, giving you an extremely comfortable warmth.
There are no moving parts to ever wear out or replace. 100 % efficient transfer of energy into usable warmth.
No wasteful energy losses through pipework, chimneys or flues which can be over 50 %.
The performance of a ''wet'' system, with no boiler, pumps or pipework to expensively maintain.
Example shows the thin ''thermal core'' centre section which contains the segments underneath the top railcap.
Elkatherm slender standard models are still only 8 cm deep - 12 cm deep when wall mounted with the included fixing kit. Easily removed when decorating.
Remember - because modern Elkatherm ''smooth warmth'' models are always emitting heat, the invisible, but all important convection current is constantly maintained. This means that your previously warmed air, which has naturally risen, is drawn back down to floor level, where it is useful again - instead of being wasted at ceiling height.
Why Use ''Smooth Warmth'' Elkatherm Models ?
Modern Elkatherm electric radiators warm directly, efficiently and evenly by maintaining a 20 minute heat reserve within the slim thermal core centre sections of each unit - just like the water does in a conventional boiler heated ''wet'' system. They are not old style night storage heaters.
As soon as the desired temperature is reached, the electric radiator stops drawing power. The radiator however remains constantly warm, and will only use the energy required to maintain your set room temperature.
BIG SERVICE IN THE SMALLEST DETAIL
Accessories
To be able to use the service of our electric heating correctly sometimes depends on details. The thermostats in this regard, e.g., are decisive for the efficient and economical regulation of the heating. This is why ELKAtherm offers you a wide range of high-grade accessories that optimally bolster the performance of the electric heaters and address your spatial circumstances individually.Towel holder
Your towels are dry in the blink of an eye. Available in widths of 41 and 68.5 cm. The perfect accessory for the SL-Series
Rollers
Make your heating mobile. Rollers allow you to take your electric heating anywhere you need heat.
Feet
Give your electric heating firm and secure footing. And flexibility as well, because you can set it up in different places at any time – exactly where you need it.
Feeder
Assures the power supply for the electric heating. The cable is 3 m long and has a safety plug. Also possible in connection with plug thermostats.
Integrated thermostat
With the integrated thermostat you can switch on the electric heating and set the desired temperature. An integrated sensor constantly monitors the room temperature so that the device switches on and off as needed. The integrated thermostat is installed in the side panel of the heater.
Plug thermostat
By means of these thermostats the power supply is connected and interrupted in order to maintain the desired room temperature. For that purpose the feed of the heater leads to an adaptor plug which is connected to the thermostat and is fed over a conventional household socket.
Room thermostat
Set the desired temperature with the room thermostat. The thermostat has an integrated sensor which checks the room temperature and thereby keeps it at the desired level. The room thermostat is connected to the electric heating and power supply by means of a surface mount or flush mount line.
Digital clock thermostat (surface mount)
The digital clock thermostat enables you to set up to 6 response times per day with temperatures suiting your personal habits. In this way the room temperature can be regulated automatically depending on the room temperature according to response times and temperatures. Once the temperature sinks below the set value, the electric heating switches on.
Digital clock thermostat with radio control
With this you can easily program the desired heating phases. A radio transmitter with receiver regulates the preselected temperature. The digital clock thermostat with radio control is available for flush mount lines or with adaptor plug for use with conventional household outlets. (Image: Set thermostat with wall socket receiver)
FAQ – THE MOST IMPORTANT ANSWERS ON THE SUBJECT OF HEATING WITH ELECTRICITY
- What is the difference between an ELKAtherm surface storage heater and a conventional night storage heater?
Night storage heaters and ELKAtherm surface storage heaters have only one thing in common: they are powered by the same energy, namely, electricity. Unlike night storage heaters, however, each tapped kWh is converted 100% by an ELKAtherm electric heater into thermal heat. Moreover ELKAtherm storage heaters reload if necessary – also by day. Once the preset temperature is reached, the heater disconnects itself from the electricity. If the room temperature sinks, the surface storage heater reconnects for a few minutes to the mains after which the power supply is again switched-off. As a consequence, not only is energy consumption lower, regulation is better as well. With a night storage heater, you already have to decide today whether you want to heat tomorrow – an ELKAtherm surface storage heater can be regulated “punctually” like any oil or gas heater.
In addition, a night storage heater is an air heating which transmits heat via the roundabout route of the room air. Moreover the air needs to be heated far above the temperature of the solid bodies in the room, which is likewise an unnecessary consumption of energy. To achieve an even distribution of air in the room, it is circulated by a fan. This gives rise to a draft above the floor in the direction of the heater; warm air hovers uselessly under the ceiling and dust is constantly swirled-up, something alarming not only for the health of allergic persons.
- Do ELKAtherm surface storage heaters have a fan?
No, ELKAtherm electric heaters do not need a fan. The extensive fireclay stones give rise to a highly effective emission of long-wave heat rays which spread-out uniformly across the room. Thus practially no temperature gradient develops between floor and ceiling and the feeling of warmth is as comfortable as with a tiled stove.
- Do I need high-voltage current?
No. You can connect an ELKAtherm electric heater to the existing power network.
- How high is the consumption of electricity?
For normally insulated rooms a yearly consumption of 75 – 125 kWh pro m² heated living space can be expected. The consumption of electricity, however, depends on many different factors: the insulation of the building, personal ventilation and heating behavior, location of the building, state of the windows and much more.
- What connection power is needed for what room size?
For normally insulated rooms, 50 Watts pro m³ cubic content are sufficient as a rule.
- What are the possibilities for setup?
Ideally, an ELKAtherm surface storage heater should be set up directly under the window on the wall. As an option, you can get the heater on rollers or feet so you can easily put the electric heater in your place of choice.
- Do I need off-peak electricity?
No. Many energy providers offer, however, favorable special rates which enable you to further reduce the monthly costs.
- Do I need a separate electricity meter?
No, unless you choose a special heating rate with your electricity provider which is separately billed.
- Can I heat my new house completely with electricity?
Yes. You´re not only spared a basement boiler room. The initial investment costs, too, are below those of an oil or gas heater; moreover electric heating is completely maintenance-free. For hot water, we recommend electric storage tanks or continuous-flow water heaters.
- Can I heat my old building with electricity?
Yes, however, you do have to make sure that appropriate line capacities are on hand.
- Are ELKAtherm surface storage heaters asbestos-free?
Yes, our electric heaters are made of scratch-proof, powder-coated sheet steel and contain exclusively heat-storing fireclay stones.
- Can I replace my old night storage heaters with ELKAtherm surface storage heaters?
Yes. You can even use the old power lines of your night storage heater; however, you need a 24-hour electricity rate.
Dispatch conditions
Deliveries are made only within Germany.
-- Clients from other countries can pick up the purchased articles from our store room; or please ask for a transport price. In case of delivery to your country the prices might change due to your local VAT!
Dispatch costs (inclusive of legally applicable VAT)
Deliveries within Germany:
We charge shipping costs on the basis of the order value (product price):
from 1 - 99,99 EUR = 6,90 EUR
Free shipping within Germany from a value of 100 EUR.
If the dispatch involves bulky goods (freight forwarding), we calculate as follows:
from 1 - 99,99 EUR = 6,90 EUR
Free shipping within Germany from a value of 100 EUR.
Bulky goods are marked as such in the item description.
- Service for clients from Switzerland: http://www.swiss-paket.de/filialen.
Delivery periods
Unless any other period is specified in the item description, the product is delivered in Germany within 3 - 50 days, in case of foreign deliveries, within 5 - 50 days after the order confirmation (in case of agreed-upon advance payment, with respect to your payment authorisation).
Please note that deliveries are not made on Sundays and other holidays.
Terms of payment
In case of deliveries within Germany, you have the following payment options:
- Prepayment via transfer with 5% discount
- Payment via credit card by Paypal
- Payment via PayPal
- Payment by invoice (via Paypal Plus)
In case of deliveries to a foreign country, you have the following payment options:
- Prepayment via transfer with 5% discount
- Payment via PayPal
- Payment via credit card by Paypal
Further details on payment
We reserve the right to make the delivery only against prepayment via transfer in isolated cases.
As long as you make the prepayment , we will grant you 5 % early payment discount on the gross product value of the order.
If payment is made using a credit card, your credit card account is debited in conjunction with the conclusion of the contract.
In case of questions, please contact us at the contact details mentioned in the Legal Notice.
All clients from these countries or other countries can pick up the articles here in Germany on request.
* Clients from NOT-EU-Countries: please ask for delivery possibilities
We deliver with RHENUS Logistics, HELLMANN Logistics, Dachser or DHL from monday to friday.
.